22
2025-10
A plastic mold for footwear materials equipped with multi-dimensional sensors has recently been put into use. Pressure and temperature sensors have been embedded at critical locations such as the mold cavity and浇口, enabling real-time collection of injection-molding process data and synchronous transmission to a cloud-based management platform. When the system detects anomalies—such as abnormal injection pressure or temperature fluctuations—it automatically issues alerts and adjusts parameters accordingly, reducing mold failure-related downtime by 60% and significantly enhancing the operational stability of the footwear production line.
2025-10-22
22
2025-10
In response to the industry’s need for an environmentally friendly transformation in the footwear materials sector, specially optimized plastic molds have successfully addressed the challenges of poor flowability and easy bubble formation associated with bio-based TPU materials by fine-tuning cavity structures, gate designs, and temperature-control systems. Testing has shown that shoe soles made using these molds achieve a first-pass yield rate of 98.2% for bio-based TPU, and the molds have already obtained EU environmental certification. They are widely suitable for producing casual shoes, children’s shoes, and other footwear categories, providing crucial technical support for reducing carbon emissions and plastic usage in the footwear materials industry.
2025-10-22
04
2020-09
Digital twin technology empowers mold R&D, shortening the prototype testing cycle by 60%.
The virtual model of shoe material plastic molds, built using digital twin technology, can accurately simulate the operational status of the mold and the cavity-filling process under various injection-molding parameters on a computer. By conducting virtual simulations in advance to optimize critical parameters such as injection temperature, pressure, and speed, this approach significantly reduces the number of physical prototype trials, shortening the mold-debugging cycle from 5 days to 2 days and cutting material waste during prototyping by 60%. This technology has been successfully applied to the development of air-cushion molds for basketball shoes, resulting in a 15% improvement in the air-cushion’s rebound performance.
2020-09-04
23
2018-11
The shoe material plastic mold equipped with an integrated intelligent locking and error-proofing system has been put into operation. Featuring a dual safeguard mechanism—comprising infrared sensing and mechanical interlocking—the system can实时 (real-time) detect the cleanliness of the mold cavity and the installation status of components before mold closing. If any foreign objects are detected inside the mold or if components are incorrectly installed, the system will immediately halt the mold-closing process, thereby preventing damage to the mold and defects in the shoe materials. After implementing this technology, the scrap rate of shoe materials caused by mold-closing issues has dropped from 2.1% to 0.3%, providing a reliable guarantee for the production of high-quality shoe materials.
2018-11-23
19
2017-07
The green manufacturing technology system for footwear material plastic molds has recently been fully implemented. In the mold manufacturing stage, dry-cutting technology is adopted, significantly reducing the use of cutting fluids. During mold operation, a closed-loop water circulation cooling system is employed; the cooled water undergoes multi-stage filtration and temperature reduction before being recycled, achieving zero wastewater discharge. Furthermore, after the molds reach the end of their service life, they can be disassembled and recycled, with a steel recovery rate exceeding 95%. This establishes a full-lifecycle green management approach—from production to disposal—thus helping the footwear materials industry achieve its carbon neutrality goals.
2017-07-19
03
2011-12
Given the production characteristics of niche footwear models—customized shoes ordered in small batches and multiple runs—the new customized plastic mold development system, leveraging parametric design software and modular mold structures, has significantly shortened the custom mold development cycle from the traditional 15 days to just 3 days. As an example, the mold for a special-texture sole used by a certain handmade shoe brand was completed in only 2.5 days, from design to manufacturing. Moreover, the cost of mold modifications was reduced by 40%, effectively enabling niche footwear companies to respond swiftly to market demands.
2011-12-03
18
2010-05
Addressing the industry’s pain points of uneven cooling and low efficiency in injection molding of sport shoe soles, a new conformal cooling plastic mold has been developed using 3D printing technology to create cooling channels that precisely match the curvature of the shoe sole. Compared to conventional straight-channel molds, this new mold reduces the cooling time for shoe soles from 120 seconds to 72 seconds, boosting molding efficiency by 40%. At the same time, it effectively solves the problem of sole deformation, reducing the defect rate from 3.5% to 0.8%. Currently, this mold has been implemented in the production line for running shoe soles, helping to achieve a daily production capacity exceeding 50,000 shoe soles.
2010-05-18